Log-In
ZEKS - Eclipse Desiccant Compressed Air Dryers - 90 – 8000 scfm
•
ZPA Heatless Regeneration
•
ZHA Heated Regeneration
•
ZBA Heated Blower Regeneration
ZEKS Eclipse desiccant compressed air dryers provide effective drying capabilities for applications where there is extremely low moisture tolerance and therefore help prevent the detrimental effects of moisture that freezes inside compressed air lines when compressed air piping installations are exposed to extremely low ambient temperatures.
These models provide long-term durability and energy efficiency.
| ZEKS Eclipse Compressed Air Dryer Overview | |
| • | Heated & Heatless Regeneration Models – designs for all drying requirements |
| • | Options for Energy Savings – minimize operating cost |
| • | Low Profile Design – reduces shipping costs and simplifies installation |
| • | High Performance Valves – reliable operation plus reduced maintenance |
| • | Convenient Service Access – minimizes maintenance time requirement |
| • | Remote Communication Ready – multiple communication options |
| • | Comprehensive Warranty Coverage – standard dryer warranty, plus 5 years on flow valves and heater |
ZPA Heatless Regeneration
| ZPA Heatless Regeneration Uses a portion of dry, unheated compressed air to regenerate the offline tower |
|
| • | Available in flow ranges from 90 SCFM to 5000 SCFM |
| • | Require the use of no more than 15% of the compressed air volume for regeneration of the desiccant beds |
| • | Standard dryers deliver -40°F pressure dew point air |
| • | For critical applications ZPA dryers can be equipped to deliver -80°F and -100°F pressure due point air |
| • | With optional DPC Controller dew points ranging from -40°F to +38°F may be selected using the SelectDry™ feature for increased energy savings |
| • | DPC Controller’s PurgeMizer™ feature permits the user to reduce the amount of purge air for applications where the dryer is operated below full flow conditions |
| • | All ZPA dryers are supplied as 115V-1Ph-60Hz |
| Standard Features | |
| • | Dependable Diaphragm Switching and Purge Valves |
| • | Reliable Solid State Timer |
| • | Dryer Status Indication Lights |
| • | Purge Pressure Gauge |
| • | High Strength Desiccant |
| • | Blue Moisture Indicator |
| • | Control Air Filtration |
| • | ASME Coded Pressure Vessels |
| • | Tower Pressure Gauges |
| • | Pressure Relief Valves |
| • | Sound Attenuating Purge Mufflers |
| • | Accessible Fill and Drain Ports |
| • | Removable Stainless Steel Diffuser Screens |
| Optional Features | |
| • | NEMA 4/DPC™ Package
|
| • | Dew Point Display |
| • | Failure-to-Shift Alarm |
| • | High Humidity Alarm |
| • | Moisture Load Control |
| • | Downstream Purge |
| • | -80°F and -100°F Dew Points |
| • | 250 psig and 300 psig MAWP |
| • | Filter Packages |
ZHA Heated Regeneration
| ZHA Heated Regeneration Uses a small amount of dry, heated compressed air to regenerate the offline tower |
|
| • | Available in sizes ranging from 150 – 8000 SCFM |
| • | Includes an external heater to heat dry purge air for regeneration – allows dryer to use 7% purge air |
| • | Delivers -40°F pressure dew point air for critical drying applications |
| • | Designed for a Maximum Allowable Working Pressure (MAWP) of 150 psig |
| • | Provided in 460V-3Ph-60Hz electrical configuration |
| Standard Features | |
| • | High Performance Switching & Purge Valves |
| • | NEMA 4 Electrical Enclosure |
| • | DPC™ Controller and DynOptic™ Panel |
| • | Failure-to-Shift Alarm |
| • | Bi-Mode Operation |
| • | AccuTemp™ Heater Control |
| • | Incoloy Sheath External Heater |
| • | Heater High Temperature with Interlock Alarm |
| • | High Efficiency Blower |
| • | Pressure & Temperature Gauges |
| • | High Strength Desiccant |
| • | Control Air Filtration |
| • | ASME Coded Pressure Vessels |
| • | Pressure Relief Valves |
| • | Sound Attenuating Purge Mufflers |
| • | Accessible Fill and Drain Ports |
| • | Removable Stainless Steel Diffuser Screens |
| Optional Features | |
| • | High Humidity Alarm |
| • | Moisture Load Control with Dew Point Display |
| • | Compressed Air Cooldown (ZBA only) |
| • | Power Saver |
| • | Filter Packages |
| • | -100°F Dew Point |
| • | 300 psig MAWP |
ZBA Heated Blower Regeneration
| ZBA Heated Blower Regeneration Uses air from a dedicated blower that passes through a heater to regenerate the offline tower |
|
| • | Provided with a dedicated blower to provide purge air for regeneration |
| • | Does not rely on dry compressed air for regeneration |
| • | More air available for critical compressed air applications |
| • | 150 – 8000 SCFM models available, each delivering -40°F pressure dew point air |
| • | MAWP of 150 psig and 460V-3Ph-60Hz electrics are standard |
| Standard Features | |
| • | High Performance Switching & Purge Valves |
| • | NEMA 4 Electrical Enclosure |
| • | DPC™ Controller and DynOptic™ Panel |
| • | Failure-to-Shift Alarm |
| • | Bi-Mode Operation |
| • | AccuTemp™ Heater Control |
| • | Incoloy Sheath External Heater |
| • | Heater High Temperature with Interlock Alarm |
| • | High Efficiency Blower |
| • | Pressure & Temperature Gauges |
| • | High Strength Desiccant |
| • | Control Air Filtration |
| • | ASME Coded Pressure Vessels |
| • | Pressure Relief Valves |
| • | Sound Attenuating Purge Mufflers |
| • | Accessible Fill and Drain Ports |
| • | Removable Stainless Steel Diffuser Screens |
| Optional Features | |
| • | High Humidity Alarm |
| • | Moisture Load Control with Dew Point Display |
| • | Compressed Air Cooldown (ZBA only) |
| • | Power Saver |
| • | Filter Packages |
| • | -100°F Dew Point |
| • | 300 psig MAWP |
Contact McKenzie to select the appropriate ZEKS compressed air dryer model to meet your application requirements.
For more information on Desiccant Compressed Air Dryers
or any other product:
Call 1-800-764-9793 or use our Contact
Form.
